100	RAS+ 95\n\nRAS+ 95\n\n\nRAS+ 95.Document\nRAS+ 95 Document
104	Windows sockets initialization failed.
105	http://www.lambsoftware.com
108	Can't locate dial up scripting utility!  Goto menu options.. properties.. general and modify location!\n
109	DropOnExit
110	Connect wav enable
111	Connect wav
112	Connect beep
117	Draw Fancy Background
119	newuser.wav
120	Opening port
121	Port opened
122	Waiting for server to answer...
123	Device connected
124	All devices connected
125	Authenticating your account
126	Authentication notify
127	Authentication retry
128	Callback requested
129	Change password requested
130	Projection phase started
131	Link speed calculation
132	Authentication acknowledged
133	Reauthenticatation started
134	Authenticated
135	Preparation for callback
136	Waiting for modem reset
137	Waiting for callback
138	Interactive mode
139	Retry authentication
140	Callback set by caller
141	Password expired
142	Connected
143	Disconnect
144	Undefined RAS error
145	Projected
147	Set Time In Min
148	Starting authentication
149	Callback complete
150	Logon to network
152	per minute
153	SOFTWARE\Lamb Software, Inc.\RAS+ 95
154	You must select which connection you want to drop!
155	RemoteAccess\Addresses
156	support@lambsoftware.com
158	per hour
160	New user wav enable
162	minute(s)
163	New user wav
165	hour(s)
166	New user beep
168	Your RAS connection appears to be in a suspended hung state?  Exit and reload Windows try again.
169	SOFTWARE\Microsoft\Windows\CurrentVersion
171	Are you sure you want to reset billing cycle?\nIt is recommended that you reset while off-line!
173	Billing disabled, unregistered version exceeded history.
178	Can't find "Connected to" window?
179	Can't find "Reestablish" window?
182	::{20D04FE0-3AEA-1069-A2D8-08002B30309D}\::{992CFFA0-F557-101A-88EC-00DD010CCC48}
185	LockScrollView
187	Currently, this version of the software has not been tested under this enviroment.  We have plans to support this environment after we stabalize our Windows 95 product.  Check WWW site in readme.doc for updates.
188	RAS+ 95 unregistered version! (This message removed in registered version)
191	You have exceeded the 20 line item limit for unregistered version.
192	PingSeconds
193	PingTimeout
194	Ping:0000 Min:0000 Max:0000
195	PingPackets
196	PingDropRedial
201	01234567
202	Active provider\nProvider
204	EntryTreePaneWidth
205	ActiveConnPaneHeight
206	Settings
207	WindowPos
209	%u,%u,%d,%d,%d,%d,%d,%d,%d,%d
210	General
211	Active provider
212	"Primary provider"
216	Busy Delay
217	LoginID
218	Password
222	TreePane
225	EditPane
230	Save on exit
232	Hide connected to window
233	ProviderSortType
234	EnableDialingTrace
235	Column %1 width
237	ActiveWorkView
256	.. launch autoload failed
257	Auto Reestablish Connection
258	My Service Provider
260	Registered version of RAS+ 95.  DO NOT REDISTRIBUTE.
261	**EVALUATION COPY**   I understand that I may evaluate RAS+ 95 for 20 days and that any other use requires purchase of a license.
264	E-Mail
265	From
266	Comment
267	Failed to create socket
283	Date
284	Time
286	%lu Kby
288	%lu Kby Free on %c:
291	Unavailable
295	Either '%1' was (1) removed from Windows outside of RAS+ (2) there was a corrupt Windows connectoid (3) RAS+ does not know how to interpret the RAS connectoid structure.  Removing connectoid from RAS+.
298	MinBPS
299	This Service Provider either has no RAS entries or all of the RAS entries have been marked skipped!
300	You must have at least one connectoid in your RAS system before setting up the Internet AutoDial feature or RAS+.
301	MainWndVisible
304	PingActive
306	PingHost
310	Failed to create Internet Autodial Entry.. please contact tech support.
311	Some components are missing.. please re-install RAS+
312	DialTimeout
313	There was an error while trying to resolve a function within your ICMP.DLL.  Ping features will be disabled until this problem is resolved.
314	TryEntryTimes
315	TimedDrop
316	EnableTimedDrop
318	EnableStartDial
319	StartHidden
320	ConnectHidden
321	****** Warning: This software is not registered and will expire January 31, 1997 ******
322	EULA
323	**** This build of RAS+ 95 has expired!!!  Please visit our web site at http://www.lambsoftware.com for the latest build ****
325	DefaultStartEntry
328	DefaultDODParams
329	The currently selected AutoDial connectoid "%1" could not be found in the RAS+ 95 tree control or no longer exists.  Either disable Internet Autodial switch or select a valid connectoid to AutoDial in the field "Choose a connectoid to AutoDial" on the next screen.
330	Park
331	Warning: could not find provider file '%1', file will be created.
332	RAS+ 95 can not verify that the startup path exists "%1".\nOr.. the RAS+ 95 startup path entry is missing in the registry.  Please re-run the RAS+ 95 setup program!  If this problem can not be resolved please contact support@lambsoftware.com
333	Warning: The Dial On Demand feature was renamed in this version to "Internet AutoDial".\nThis build of RAS+ 95 no longer uses the "RAS+ 95 DOD stub" entry which it created in a previous version and was deleted.  In order to use the new Internet AutoDial feature, please goto the menu option "settings >> RAS+ 95 properties" and select the "Internet Autodial" tab.  Choose the connectoid that you want to automatically connect with when a application tries to use to the Internet.
334	You must choose a valid connectoid to AutoDial!  This entry must exist in both Win95 and RAS+ 95 tree control.
335	Internet AutoDial was not detected on your system.  Internet AutoDial is used to automatically connect you to the Internet whenever any 32-bit Winsock application needs Internet access and you are offline. Do you want RAS+ 95 to add this feature now?
336	DefDODDialType
337	RAS+ 95 failed to load the "raspls95.prv" provider file correctly.  Your Service providers and conectoids have not been restored correctly.  Please run the menu option Activities >> RAS+ 95 welcome wizard.\n\nThis message may appear when running an older copy of RAS+ 95 after running a newer build of RAS+ 95.
338	Warning: could not find launch file '%1', file will be created.
339	Internet AutoDial requires you to pick a connectoid you want to dial when any winsock program tries to use the Internet.  On the next screen, turn on the Internet AutoDial switch and select a valid connectoid in the "Choose a connectoid to AutoDial" field.
340	There are no connectoids added to in the RAS+ 95 tree control on the main page.  Please cancel this screen and add some connectoids to the RAS+ 95 tree control.
341	Splash
342	TestMode
343	CycleStop
344	(Warning) Could not retrieve the launch application "%1" file information.  The file may no longer exist.\nThis application was removed from the launch list.
345	You must first highlight a launch application icon before using this button.
346	Congratulations!!  You are now ready to use RAS+ 95!!\n\nTip 1: Each item in the connectoid tree control to the left has a hidden context menu associated with it.  Click the right mouse button to see the context menu which will allow you to control and modify the highlighted item to meet your specific preferences.\n\nTip 2: Service providers and connectoid items may be re-arranged simply by holding down your your left mouse while dragging the item to its new location and releasing the mouse button.\n\nTip 3: Enjoy!
347	%1
348	You must have at least one launch group before adding to the the launch pad.  Select new in the launch name section.
349	This launch group already exists on the launch pad!
350	Launch Buttons
351	FirstRunWelcome
352	Shareware version limited to 2 launch groups!  Registered version allows 100 launch groups.
353	Shareware version limited to 1 launch application per launch group.  There is no limit in registered version.
354	Internet AutoDial dialing method not chosen.  Please re-select a valid dialing method.
355	 
356	999999.9Kbps
357	 
358	999999.9Kbps
359	DropReceived
360	DropSent
361	KReceived
362	KSent
363	MinutesReceived
364	MinutesSent
365	IdleDropWarning
367	IdleDropWarningSec
368	Please increase the minimum value of the selected field.
369	Can't find the Win95 dial up networking modem status lights tray applet.  In order to use Idle drop and or RAS+ modem status indicators you must have Win95's modem status lights active during the session.  The next time you connect with RAS+ 95 the modem status lights should display automatically and this feature will be enabled.
370	IndRecType
371	LogThroughput
372	IndSndType
373	(Warning) Connection dropped by another RAS service.
374	TrayDialMethod
375	The icmp.dll which is used for the ping feature was not located.  This feature is not required to run RAS+ 95.  However, ping will be disabled this session. Make sure the TCP/IP protocol is installed!\nDo you want to try to locate icmp.dll the next time RAS+ 95 starts?
376	LocateICMP
377	SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\OptionalComponents\MSISDN
32771	Only dial this entry\nDial this entry
32772	Cycle through all entries accociated with this Service Provider.\nService Provider Dial
32773	Hang up and or abort current dialing operation\nHang up
32774	Abort current connection\nAbort connect
32775	Disconnect the active entry\nDisconnect
32776	Cycle through the service provider, dialing each connectoid\nService provider dial
32777	Dial the selected connectoid listed in the tree view\nConnectoid dial
32778	Modify the Service Provider that this connectoid belongs to.
32780	Modify properties for RAS+ 95\nRAS+ Properties
32783	Creates a new connectoid
32784	Refresh RAS+ 95 by re-reading RAS entries from windows
32785	Modify connectoid properties
32786	Modify login properties such as user ID and password
32787	Temporarily skips this entry when connecting (ex. ring no answer).  Will reset on RAS+ 95 exit.\nTemporily skips entry
32804	Change the tree's font
32805	Change selected font
32806	Clear the text in the window
32808	Change the name of the connectoid
32809	Delete the connectoid
32810	Allows you to automatically login to a ppp/slip server without having to type your login and password each time
32811	Start the add-on scripting utility, included with Plus! or download from Microsoft
32812	Deletes the selected Service Provider and all of its RAS entries (children) from both the RAS+ AND Windows Dial Up Networking folder
32813	Requires connection to internet (http://www.lambsoftware.com)
32815	Billing summary
32819	Display the Win95 Dial Up Networking folder
32824	Load file
32837	Force applications to launch on demand.\nLaunch Applications
32838	Manually shut down launched apps that are marked for close on exit.
32839	Display license agreement
32840	Order RAS+ 95!
32841	Rename the selected Service Provider
32842	Testing
32861	Add a new Service Provider
33002	Modify NT servers dialing settings - authentication domain and callback number
33003	Toggle the Plus! RAS server to allow incoming calls, requires Plus! pack to be installed
33006	Cycle through each Service Provider, dialing all connectoids\nAll Service provider dial
33007	Hide RAS+
33008	Unloads RAS+ 95 and exits application
33011	Removes the selected Service Provider and all of its children from RAS+ WITHOUT deleting it from Dial Up Networking
33017	Change the properties of the selected item
33021	Win95 networking dialog
33022	Configure and setup Win95 modems and dialing preferences
33023	Microsoft Plus! Internet configuration dialog
33025	Microsoft Plus! internet setup wizard
33031	Allows you to place an order for RAS+ 95 while on the Internet!
33033	Delete the selected tree item
33034	Re-reads connectoid from Windows and updates tree items
33035	Import a previously configured Service Provider Pack (SPP) file.
33036	Export current setup to a Service Provider Pack (SPP) file
33037	Change all RAS entries assigned to this provider with the specified settings
33039	Summarize all RAS+ entries statistics
33041	If the selected Service Provider fails to connect within n loops, try the alternate
33043	Welcome new user wizard (prototype)
33044	Insert a new launch group which starts an group of applications when you connect to this entry
33045	Hide the RAS+ 95 application and park it in the Win95 tray icon area\nHide and park in tray
33048	Insert a new item
33066	Add a executable to the launch bar
33067	Add a new application to the launch toolbar
33068	Configure launch control
33274	Drops the connection and exits RAS+ 95\nDisconnect and exit
57344	RAS+ 95
57345	For Help, press F1
57346	Select an object on which to get Help
57605	Change the printing options\nPage Setup
57606	Change the printer and printing options\nPrint Setup
57607	Print the active document\nPrint
57609	Display full pages\nPrint Preview
57612	Requires internet MAPI client (support@lambsoftware.com)\nSend Mail
57634	Copy selected connectoid and prepare for duplicating it with Paste
57637	Paste a previously copied connectoid
57653	Split the active window into panes\nSplit
57664	Display program information, version number and copyright\nAbout
57665	Hide RAS+, tray icon still active
57666	List Help topics\nHelp Index
57667	List Help topics\nHelp Topics
57668	Display instructions about how to use help\nHelp
57669	Display help for clicked on buttons, menus and windows\nHelp
57670	Display help for current task or command\nHelp
57680	Switch to the next window pane\nNext Pane
57681	Switch back to the previous window pane\nPrevious Pane
59136	EXT
59137	CAP
59138	NUM
59139	SCRL
59140	OVR
59141	REC
59392	Show or hide the main toolbar\nToggle main toolBar
59393	Show or hide the status bar\nToggle StatusBar
59394	Launch applications toolbar
61184	Change the window size
61185	Change the window position
61186	Reduce the window to an icon
61187	Enlarge the window to full size
61188	Switch to the next document window
61189	Switch to the previous document window
61190	Close the active window and prompts to save the documents
61202	Restore the window to normal size
61203	Activate Task List
61440	Open
61441	Save As
61442	All Files (*.*)
61443	Untitled
61445	Close print preview mode\nCancel Preview
61446	an unnamed file
61457	&Hide
61472	No error message is available.
61473	An unsupported operation was attempted.
61474	A required resource was unavailable.
61475	Out of memory.
61476	An unknown error has occurred.
61504	on %1
61505	&One Page
61506	&Two Page
61507	Page %u
61508	Page %u\nPages %u-%u\n
61509	prn
61510	Output.prn
61511	Printer Files (*.prn)|*.prn|All Files (*.*)|*.*||
61512	Print to File
61513	to %1
61696	Invalid filename.
61697	Failed to open document.
61698	Failed to save document.
61699	Save changes to %1?
61700	Failed to create empty document.
61701	The file is too large to open.
61702	Could not start print job.
61703	Failed to launch help.
61704	Internal application error.
61705	Command failed.
61706	Insufficient memory to perform operation.
61707	System registry entries have been removed and the INI file (if any) was deleted.
61708	Not all of the system registry entries (or INI file) were removed.
61712	Please enter an integer.
61713	Please enter a number.
61714	Please enter an integer between %1 and %2.
61715	Please enter a number between %1 and %2.
61716	Please enter no more than %1 characters.
61717	Please select a button.
61718	Please enter an integer between 0 and 255.
61719	Please enter a positive integer.
61720	Please enter a date and/or time.
61721	Please enter a currency.
61728	Unexpected file format.
61729	%1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730	Destination disk drive is full.
61731	Unable to read from %1, it is opened by someone else.
61732	Unable to write to %1, it is read-only or opened by someone else.
61733	An unexpected error occurred while reading %1.
61734	An unexpected error occurred while writing %1.
61836	Unable to read write-only property.
61837	Unable to write read-only property.
61840	Unable to load mail system support.
61841	Mail system DLL is invalid.
61842	Send Mail failed to send message.
61856	No error occurred.
61857	An unknown error occurred while accessing %1.
61858	%1 was not found.
61859	%1 contains an invalid path.
61860	%1 could not be opened because there are too many open files.
61861	Access to %1 was denied.
61862	An invalid file handle was associated with %1.
61863	%1 could not be removed because it is the current directory.
61864	%1 could not be created because the directory is full.
61865	Seek failed on %1
61866	A hardware I/O error was reported while accessing %1.
61867	A sharing violation occurred while accessing %1.
61868	A locking violation occurred while accessing %1.
61869	Disk full while accessing %1.
61870	An attempt was made to access %1 past its end.
61872	No error occurred.
61873	An unknown error occurred while accessing %1.
61874	An attempt was made to write to the reading %1.
61875	An attempt was made to access %1 past its end.
61876	An attempt was made to read from the writing %1.
61877	%1 has a bad format.
61878	%1 contained an unexpected object.
61879	%1 contains an incorrect schema.
61888	pixels